Leading 10 usual forklift accidents ， forklift operation need to focus on these issues ！.

Leading 10 usual forklift accidents ， forklift operation need to focus on these issues ！.

Blog Article

Don't underestimate the forklift at the office. If the operation is bad, there will be significant crashes in mins, and there are many crashes entailing forklifts.

Case 1: The forklift freight blocked the chauffeur's view, and the individual ahead could not be located, resulting in a rolling accident.
Case 2: In order to keep the balance of the forklift when lifting heavy items, the staff members utilized their body weight as the weight, which practically created casualties.
Instance 3: The width of the forklift cargo surpasses the allowable size of the path and holds on the roadside rack, which nearly causes an mishap.
Situation 4: Forklift is speeding up and surrender during a turn.
Situation 5: The forklift vehicle driver did not discover the pedestrian, and the pedestrian did not see the forklift.
Case 6: The forklift lifts the workers unlawfully, the forklift driver does not wear the seat belt, the forklift lifter drops and the vehicle driver is squashed when the forklift rolls over.
Situation 7: The forklift vehicle driver did not wear a seat belt and fell from the automobile when it surrendered and was crushed.
Forklift procedure need to pay attention to these issues ：.

Start.
1. Before beginning, observe the environments, and after confirming that there are no barriers that hinder the safety of driving, honk the horn first and afterwards start.
2. For lorries with hydraulic ( atmospheric pressure) brakes, the brake hydraulic stress ( atmospheric pressure) gauge need to be secure before beginning.
3. When the forklift begins with a lots, the driver should first verify that the lots is steady and trustworthy.
4. The begin should be sluggish and stable.

Driving.
1. When driving, the height between the bottom end of the fork and the ground should be maintained 300mm-400mm, and the mast should be slanted backwards. .
2. Do not lift the fork too high when driving. When getting in and leaving the work site or while driving, take care that there will be no barriers in the sky. When the tons is taking a trip, the fork must not be raised too high, which will certainly affect the security of the forklift. .
3. After discharging, the fork ought to be decreased to the normal driving setting before driving. .
4. When turning, if there are pedestrians or vehicles nearby, the driving signal should be released first. High-speed sharp turns are prohibited. High-speed sharp turns will trigger the lorry to lose side security and topple. .
5. When the forklift is downhill, it is purely prohibited to turn off the fire and slide, and it is prohibited to brake instantly while driving with lots unless there are special scenarios.
6. When the forklift is running, it needs to comply with the traffic rules in the manufacturing facility and need to keep a particular safety and security distance from the lorry ahead. .
7. When the forklift is running, the load has to be in the most affordable setting that does not prevent the driving, and the gantry ought to be appropriately tilted back. The tons shall not be raised other than when piling or packing. .
8. The elevation of the lots must not block the chauffeur's view. In unique conditions, when the product affects the forward vision, drive at a low rate when turning around.
9. It is restricted to switch on the ramp, nor to drive across the ramp. .
10. The safe driving speed of the forklift in the factory area is 5 km/h, and it has to drive safely at a low speed when getting in the manufacturing workshop area. .
11. When the forklift is raised, raised or driven, it is prohibited for workers to stand on the fork to hold things and play a balancing duty. .
12. If troubles are located, they will certainly be repaired and reported in a prompt fashion, and they will never ever operate with diseases or hide them.

filling and discharging.
1. When fork-loading products, the range between both forks need to be adjusted as needed to make the lots of the two forks balanced and not manipulated, and one side of the product should protest the rack. .
2. It is prohibited to deal with a solitary fork or make use of a fork top or pull. In unique circumstances, Electric Forklift Truck for Warehouse security warning signs should be established to advise bordering pedestrians. .
3. In the process of filling and dumping items, the forklift must be stopped with the brake. .
4. The rate of the car should be slow-moving and steady. Be careful not to roll the wheels on the dunnage, so as not to extend the rolled objects and injure people. .
5. When using a fork to fork the goods, the fork must be as deep as possible under the lots, and it ought to be kept in mind that the fork suggestion need to not touch other goods or objects. The lots should be supported with marginal back tilt of the gantry so that the tons does not glide backwards. The mast can be tilted forward slightly when the tons is decreased to permit very easy positioning of the lots and extraction of the forks. .
6. It is prohibited to fork items at broadband and collide with hard things with the fork head. .
7. When the forklift is working, it is forbidden for people to loaf the fork, so regarding stay clear of the collapse of the goods and hurt individuals. .
8. Straining is restricted, and it is prohibited to use forks to lift workers to engage in high-altitude procedures to stay clear of high-altitude falling accidents. .
9. It is not enabled to make use of the brake inertia to slip, put, round or roll items. .
10. It is not permitted to use forks to select, transform pallet discharge.

Leaving .
1. It is forbidden to leave the forklift when the things on the fork are in the air. Prior to leaving the forklift, you have to discharge the goods or lower the fork frame.
2. Draw the parking brake take care of to dead or depress the emergency brake switch.
3. The engine is shut off and the power is removed. (Except for special conditions, such as the vehicle driver does not leave the automobile's line of sight and does not go beyond 1 min).
4. Get rid of the key. .

Forklift Operation Precautions.
1. Prior to and after the forklift operation, the appearance must be checked, and gas, lubing oil and air conditioning water need to be added.
2. Examine the safety performance of beginning, running and braking.
3. Inspect whether the lights and horn signals are complete and reliable.
4. Throughout the operation of the forklift, check whether the stress and temperature are typical.
5. After the forklift is Stand-on Electric Pallet Stacker running, the external leak should additionally be checked and the seals must be replaced in time.

Forklift Safety Operation Specifications.
1. You have to inspect before leaving the car;.
2. When you encounter somebody before you throughout driving, you need to send out a signal at a distance of 5 m;.
3. The driving rate in the manufacturing facility does not exceed 5 km/h;.
4. When driving, the low point of the freight ought to be 0.3 m ~ 0.4 m in the air;.
5. The turning ought to not be also sharp to avoid the propensity of " totally free switching";.
6. Running up and down the incline ought to be sluggish and uniform, and no switching on the slope is permitted.
7. Do not drive throughout the slope. When the gradient is above 10%, the car must be driven backwards when declining;.
8. When the forklift workers lug the goods and progress, if they encounter large or hefty products and most likely to the vehicle driver's line of vision, they should take the turning around exercise
.
The "Eight Prohibitions" must be followed in the procedure.
1. Solitary fork operation is not permitted.
2. It is not enabled to raise the goods for long distance driving.
3. It is not permitted to grab the goods by passing on the pallet with the fork.
4. It is not enabled to directly shovel chemicals, flammables and various other harmful chemicals with forks.
5. It is not allowed to use inertia pressure to pick up the goods.
6. It is not allowed to utilize braking pressure to exile round or easy-to-roll items.
7. It is not permitted to bring people to deal with the pallet or fork, and it is purely prohibited to stand under the fork after the fork is elevated.
8. Do not drive side to side on inclines
.
Parking is not permitted under the following problems.
1. Contours, narrow roads, train crossings;.
2. Areas with a longitudinal slope higher than 5%.
3. When there is an obstacle on one side of the road, the opposite side of the area with the same length as the obstacle ought to be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844